Dell PowerEdge Rack Enclosure 4820 - Manual (Page 26)

24
Installation Guide
Figure 1-12. Adjusting the Leveling Feet
Installing the Rack Stabilizer Feet
WARNING:
Installing systems in a rack without the front and side stabilizer feet
installed could cause the rack to tip over, potentially resulting in bodily injury
under certain circumstances. Therefore, always install the stabilizer feet before
installing components in the rack.
Install stabilizer feet on the rack as follows:
• Install front and side stabilizer feet on a standalone rack.
• Install front stabilizer feet on all racks in a suite, and install left or right
stabilizer feet on the racks at each end of a suite.
1 leveling foot stem 2 hex nut
3 leveling pad
3
1
2