Dell PowerEdge Rack Enclosure 4820 User Manual
Page 36
Advertising
34
Installation Guide
5 Install the coupling brackets.
a
Position the two racks side by side.
b
Adjust the leveling feet on both racks so that the racks are parallel
and in the same horizontal plane. For instructions, see "Adjusting the
Leveling Feet" on page 24.
c
To install the coupling brackets on the racks, hook the brackets into
the square holes inside and adjacent to the rack posts, and tighten the
brackets using the wingnuts (see Figure 1-21).
Figure 1-21.
Coupling Two Racks
1
coupling bracket locations
2
wingnut
3
coupling bracket (4)
1
3
2
Advertising