Cobra Electronics ESD-9220 WX - Manual (Page 13)

Detection
19
Detection
18
Laser
Indicator “W” is illuminated.
Safety Alert ®
Traffic Warning
System and
Strobe Alert
™
Laser
Detection with
360˚LaserEye
®
Note
The display does not
indicate signal strength for
VG-2, Safety, Strobe, and
Laser alerts.
VG-2 Undetectable
The Cobra® ESD-9220 WX is undetectable by police
VG-2 detection devices. It will alert you when one is
in use near your vehicle. During this time, the unit is
still on full alert and able to detect other signals.
VG-2 Audio Alert
To turn VG-2 Audio Alert “OFF”, press and hold the
Dim Button for 2 seconds. A single confirmation
beep is heard, indicating the VG-2 Audio Alert has
been disabled.
To turn the VG-2 Audio Alert “ON”, press and hold
the Dim Button for 2 seconds again. A double
confirmation beep is heard, indicating VG-2 Audio
Alert has been activated.
The VG-2 LED on the front of the unit will
illuminate.
VG-2 Alert ®
Note
In Voice Alert™ Mode, the
unit will announce “VG-2
Audio On” when the VG-2
Audio Alert is activated and
“VG-2 Audio Off” when VG-
2 Audio Alert is deactivated.
Operation of the VG-2
Audio Alert may be selected
by the user. The factory
default setting is in the
“ON” position.
Note
VG-2 Audio Alert On=
“Beep-Beep”
VG-2 Audio Alert Off=
“Beep”
Laser will trigger 3 distinct audible alerts; one
each for LTI 20-20, Ultra Lyte and ProLaser.
Safety Alert® Traffic Warning System
and Strobe Alert™
Indicator “W” is illuminated whenever a signal
from a Safety Alert® or Strobe Alert™ transmitters
are received.
PRESS &
HOLD
City/ Wx