Cobra Electronics ESD-9220 WX - Manual (Page 9)

Operation
11
Note
In Voice Alert™ Mode, the
message “Bright, Dim, or
Dark” will also be heard.
Note
Bright = “Beep-Beep”
Dim = “Beep”
Dark = “Beep”
Note
The factory default setting
is Bright Mode.
Note
The ESD-9220 WX will
retain the chosen Mode
while OFF.
Dim Button
Operation
Turning On Your ESD-9220 WX Turning
On Your
ESD-9220 WX
Dim
City Wx
Wx
Mute
B A N D
Plug power cord
into detector. Plug power cord
into cigarette lighter. 2 1
Rotate ON-OFF Volume Control to the left
(away from you). In both Tone and Voice
Modes, the unit will announce “Testing”,
followed by three beeps. This confirms Power
ON. All LEDs will light up from left to right in
sequence and announce “System Ready.”
The system indicates if Voice Alert™ or Tone
Only Mode has been selected and if VG-2
Audio Alert is turned On or Off.
10
Dim Button
You may select from three levels of brightness for your
Cobra® ESD-9200 WX display: Bright, Dim, and Dark.
Press and release DIM button a third time to
return led display to Bright. A double beep
confirms normal LED brightness.
1
2
3
PRESS &
RELEASE
City/ Wx
PRESS &
RELEASE
AGAIN
City/ Wx
PRESS &
RELEASE
3RD TIME
City/ Wx
Press and release DIM button to reduce the
LED display brightness to Dim. A single beep
confirms dim LED brightness.
Press and release DIM button again to turn
LED display off. A single beep confirms no LED
display. The power LED will stay on dim.