Cobra Electronics ESD-9220 WX - Manual (Page 6)

Quick Start
5
Turn On and Adjust Volume Turn On and
Adjust Volume
Installation
4
Note
It will be easy for you to
remove and reinstall your
Cobra® ESD-9220 WX
detector at any time using
this hook and loop material
on the dashboard.
Remember: Without the
means to adjust the angle
of the detector (when
mounted as above), be
sure you that your Cobra®
ESD-9220 WX has a level,
clear view of the road
before you attach the hook
and loop material.
Note
Display Brightness, City/
Highway, Muting, VG-2
Audio Alert On/Off,
Weather Radio On/Off
(including last station
tuned), Wx Alert On/Off
settings are retained in
memory even when unit is
turned OFF or removed
from power source.
Dash Mounting Dash
Mounting
Dim
City Wx
Wx
Mute
B A ND
Plug power cord into
detector.
Place antenna in
upright position for
optimum reception of
weather stations.
Plug power cord into
cigarette lighter.
Peel protective paper off
one side of hook and
loop material. Place on dash.
Peel top paper off. Place detector on hook
and loop pad.
1 2
3
4
5
7
6
Rotate ON-OFF Volume Control to left (away
from you). In both Tone and Voice Modes, the
unit will announce “Testing” followed by three
beeps. All LEDs will light up from left to right
in sequence and announce “System Ready.” 1