Cabletron Systems HSIM-F6 - Manual (Page 21)

Installing an HSIM
HSIM-F6 User’s Guide 2-5
4. Slide out the module, and place it on its side with the internal
components facing up.
5. Refer to Figure 2-3 and remove the two faceplate mounting screws
and the HSIM coverplate. Save the screws.
6. Refer to Figure 2-3 and remove the two standoff screws. Save the
screws.
Figure 2-3 Removing the HSIM Coverplate
7. Refer to Figure 2-4 and place the HSIM behind the module faceplate.
8. Align the HSIM connector of the HSIM-F6 into the HSIM pins on the
module.
Standoff Screws
Faceplate Mounting
Screws
Coverplate
209135