Specifications, 1 fiber optic interface, 1 multimode specifications – Cabletron Systems HSIM-F6 User Manual
Page 63: Chapter 5, Fiber optic interface -1 5.1.1, Multimode specifications -1, Chapter 5 specifications
HSIM-F6 User’s Guide
5-1
CHAPTER 5
SPECIFICATIONS
This chapter lists the operating specifications for the HSIM-F6. Cabletron
Systems reserves the right to change these specifications at any time
without notice.
5.1
FIBER OPTIC INTERFACE
Depending on the FPIM, interfaces have the following characteristics:
5.1.1
Multimode Specifications
Table 5-1
Multimode Transmitter Specifications
Multimode Transmitter
Optical wavelength
1330 nm typical
Optical output
-20.0 dBm minimum
-14.0 dBm maximum
Optical rise time
3.5 ns maximum
Optical fall time
3.5 ns maximum
Spectral width
140 nm typical
Supply current
150 mA maximum
Table 5-2
Multimode Receiver Specifications
Multimode Receiver
Optical wavelength
1330 nm typical
Optical input
(avg. sensitivity)
-31.0 dBm minimum
-14.0 dBm maximum
Output rise time
3 ns maximum
Output fall time
3 ns maximum
Supply current
150 mA maximum