Cabletron Systems HSIM-F6 User Manual
Page 22
Advertising
Chapter 2: Installation
2-6
HSIM-F6 User’s Guide
9.
Press down firmly on the back of the HSIM until the pins slide all the
way into the HSIM Connector.
10.
Secure the HSIM-F6 to the module faceplate using the mounting
screws saved in
11.
Secure the HSIM-F6 to the module standoffs using the standoff screws
saved in
12.
Reinstall the module in the chassis.
13.
Reattach the network cabling to the module.
for instructions on configuring the HSIM-F6 using
Local Management.
NOTE
Ensure that the standoffs on the interface module align with the
standoff screw holes on the HSIM.
Advertising