Dell PowerVault 220S (SCSI) - Manual (Page 16)

1-12 Rack Installation Guide
w
w
w
.d
e
ll
.co
m
|
s
u
p
p
o
rt
.d
e
ll.c
o
m 5 To remove the tower system base:
a Lay the system on its right side.
b Use a 3/16-inch hex-head (Allen) wrench to remove the two hex-socket cap screws
and flat washers from the base of the tower chassis
c Remove the base and set it aside (see Figure 1-8).
F i g u r e 1 - 8 . R e m o v i n g t h e To w e r S y s t e m C o v e r
round covers (2)
base
hex-socket
cap screw (4)
flat washer (4)
left and right covers