Dell PowerEdge Rack Enclosure 4210 - Manual (Page 10)

8
Dell™ PowerEdge™ 4210 Installation Guide
Installation Tasks
Installing a rack cabinet involves performing the following tasks:
1 Removing and replacing the rack doors
2 Removing and replacing the side panels
3 Reversing the front door and badge (optional)
4 Securing the leveling feet
5 Installing the stabilizer feet
6 Routing cables through the rack
7 Coupling two racks (optional)
8 Removing high-density rear door panels
Recommended Tools and Supplies
You may need the following tools and supplies to install the rack:
• #2 Phillips screwdriver
• Flat head screwdriver
• 12-mm wrench
• Needle-nose pliers
• 4-mm Allen wrench (if you want to reverse the direction that the front
door opens)
• 5-mm Allen wrench (included in kit)
• Keys to the rack doors and side panels
Removing and Replacing the Rack Doors
CAUTION:
Because of the size and weight of the rack cabinet doors, never
attempt to remove or install them by yourself.
CAUTION:
Store the doors where they will not injure someone if the doors
accidently fall over.
Removing the Front Door
1 Press the door-latch button to release the door handle, then open the front
door all the way (see Figure 1-1).