Replacing the front door, Opening and removing the back doors – Dell PowerEdge Rack Enclosure 4210 User Manual
Page 12

10
Dell™ PowerEdge™ 4210 Installation Guide
5 Lift the door upward so that the door clears the bottom hinge post.
CAUTION:
Due to the size and weight of the door, it is recommended that you lay
the removed door flat.
6 Lay the panel in a safe location with the panel’s outer surface facing
upward.
Laying the door flat with the outer surface facing upward will help prevent
damage to the door’s cosmetic coating.
Replacing the Front Door
To replace the front door, perform the steps for removal in reverse.
Opening and Removing the Back Doors
CAUTION:
Because of the size and weight of the rack cabinet doors, never
attempt to remove or install them by yourself.
1 Open the back doors.
a
Press the door-latch button to release the right door handle (see
Figure 1-2).
b
Open the right door.
c
Compress the left door’s pinch latch to release the left door (see
Figure 1-2).
d
Open the left door.