Dell PowerEdge Rack Enclosure 4210 User Manual
Page 31
Advertising
Dell™ PowerEdge™ 4210 Installation Guide
29
5 Install the hexagonal spacers.
a
Position the two racks side by side.
b
Adjust the leveling feet on both racks so that the racks are parallel and
in the same horizontal plane. For instructions, see "Adjusting the
Leveling Feet."
c
Install the four hexagonal spacers on the front and back of the racks
with the provided Allen screws, as shown in Figure 1-14.
d
Use the stamped metal crescent wrench to hold each hexagonal spacer
in turn and tighten the Allen screws.
Advertising