Cisco Linksys SPA9000 - Manual (Page 118)

4-28
Linksys SPA9000 Administrator Guide
Document Version 3.01
Chapter 4 Configuring SPA9000 Features
Music On Hold
To start a group page, make a call by dialing pagegroup. For convenience, this special number is
included in the corporate directory. A speed dial or personal directory entry can also be defined locally
on a specific phone.
Music On Hold
This section describes how to manage the music on hold (MOH) feature. It includes the following topics:
• Overview, page 4-28
• Changing the Internal Music Source, page 4-28
• Restoring the Default Internal Music Source, page 4-29
• Using a Streaming Audio Server, page 4-30
• Using the IVR with an SAS Line, page 4-30
• Example SAS with MOH, page 4-31
• Configuring the Streaming Audio Server, page 4-32
Overview
The SPA9000 has an internal music source with the user-id imusic that plays an internally stored music
file repeatedly. The SPA9000 ships with a default music file (Romance de Amor). You can override this
file by downloading a new file into the unit using TFTP. You do this by entering a valid value in the
<Internal Music URL> parameter. The music file must be in G.711u format sampled at 8000 samples/sec
with no file header. The maximum length is 65.5 seconds.
You can control the way the music file is played by setting the <Internal Music Script> parameter. To
use the internal music source as the MOH server on a client station, specify imusic for the value of the
<MOH Server> parameter on the client station.
Changing the Internal Music Source
The following resources are required for changing the internal music source:
• TFTP server software
• The IP address of the computer on the LAN connected to the SPA9000.
• Music source in G.711 u-law format at 8000 samples per second with no header information.
Before you begin, make sure the TFTP server software is running on your computer. Then complete the
following steps.
Step 1 Direct your browser to the following URL:
spa9000_ip/admin/voice/advanced
Replace spa9000_ip with the IP address of the SPA9000. Use IVR option 110# to determine the IP
address.
Step 2 Click the SIP tab and scroll down to the Internal Music Source Parameters section.