Setting up your computer – Dell OptiPlex 320 User Manual

Page 8

Advertising
background image

8

Quick Reference Guide

Setting Up Your Computer

CAUTION:

Before performing any of the procedures in this section, follow the safety instructions in Product

Information Guide.

NOTICE:

If your computer has an expansion card installed (such as a modem card), connect the appropriate cable

to the card, not to the connector on the back panel.

NOTICE:

To help allow the computer to maintain proper operating temperature, ensure that you do not place the

computer too close to a wall or other storage compartment that might prevent air circulation around the chassis.

NOTE:

Before you install any devices or software that did not ship with your computer, read the documentation

that came with the device or software, or contact the vendor to verify that the device or software is compatible
with your computer and operating system.

You must complete all the steps to properly set up your computer. See the appropriate figures that follow
the instructions.

NOTICE:

Do not attempt to operate a PS/2 mouse and a USB mouse simultaneously.

1 Connect the keyboard and mouse.

NOTICE:

Do not connect a modem cable to the network adapter connector. Voltage from telephone

communications can cause damage to the network adapter.

Set Up Your Keyboard and Mouse

2 Connect the modem or network cable.

Insert the network cable, not the telephone line, into the network connector. If you have an optional
modem, connect the telephone line to the modem.

Advertising