Canon 300 HS - Manual (Page 121)

Erasing Images
121
Protect images.
∆ Press the op buttons or turn the – dial to
choose [Protect] and press the m button.
You can select images to erase. Since erased images cannot be recovered,
exercise adequate caution before erasing. Protected images
(p. 118) cannot
be erased.
Choose [Erase].
∆ Press the n button, choose the 1
tab and [Erase], and press the m button.
Choose a selection method.
∆ Press the op buttons or turn the – dial
to choose a selection method, and press
the
m button.
∆ Pressing the n button will restore the
menu screen.
Choosing Images Individually
Choose [Select].
∆ Follow Step 2 above to choose [Select]
and press the
m button.
∆ Press the qr buttons or turn the – dial to
choose the image and press the m button.
Once set, will appear on the screen.
You can unlock the images you protected if you choose [Unlock] in Step 4,
while in [Select Range], or Step 2 while in [All Images].
Erasing Images