Canon 300 HS - Manual (Page 19)

19
The Date/Time settings screen will appear the first time the camera is turned
on. Since the dates and times recorded into your images are based on these
settings, be sure to set them.
Turn on the camera.
∆ Press the ON/OFF button.
The Date/Time screen will appear.
Set the date and time.
∆ Press the qr buttons to choose an option.
∆ Press the op buttons or turn the – dial
to set a value.
Complete the setting.
∆ Press the m button.
Once the date and time have been set, the
Date/Time screen will close.
∆ Pressing the ON/OFF button will turn off
the camera.
Setting the Date and Time
Set the correct date and time. If you have not set the date and time, the Date/Time
screen will appear each time you turn on the camera.
If you choose in Step 2 and press the op buttons or turn the – dial to
choose , you will set the time to daylight saving (1 hour ahead).
Reappearing Date/Time screen
Daylight saving time settings