Adjusting the brightness (exposure compensation), Turning the flash on, Adjusting the brightness – Canon 300 HS User Manual

Page 71: Exposure compensation), P. 71), Pp. 71, Enter exposure compensation mode, Adjust the brightness, Choose h

Advertising
background image

71

You can adjust the standard exposure set by the camera in 1/3-stop
increments in the range of –2 to +2.

Enter Exposure Compensation
mode.

Press the

o button.

Adjust the brightness.

While watching the screen, turn the

– dial

to adjust the brightness and press the

o

button.

 

The exposure compensation amount will
appear on the screen.

You can make the flash fire every time you shoot. At maximum wide angle,
the flash range is approximately 30 cm – 6.0 m (12 in. – 20 ft.), and at
maximum telephoto, it is 50 cm – 2.0 m (1.6 – 6.6 ft.)

Choose

h.

After pressing the

r button, press the qr

buttons or turn the

– dial to choose h,

then press the

m button.

 

Once set,

h will appear on the screen.

Adjusting the Brightness (Exposure Compensation)

Turning the Flash On

Advertising