Lenovo USB 2.0 CD-RW/DVD-ROM Combo II Drive - Manual (Page 40)

Region code Region
1 U.S., Canada
2 Europe, Middle East, South Africa, Japan
3 Southeast Asia, Taiwan, Korea
4 Latin America, Australia, New Zealand
5 Former Soviet Union, North Africa, India
6 People’s Republic of China
Start WinDVD by inserting the DVD into the drive. The region code is
automatically set and you can view the movie. This is the initial setting.
After the region code has been set, if you insert a DVD with a different region
code, you are prompted to change the region code. You can change the region
code from your initial setting up to four times. A single region disc with the
new region must be in the drive to sucessfully change the region.
After the region code has been changed from its initial setting four times, it is fixed
and can no longer be changed. Thereafter, you can play DVD content only from
that region.
To display the region code status, click the WinDVD Properties button on the
WinDVD user interface. The General tab contains this information.
To change the region code, do the following:
1. Turn on your computer and start your operating system.
2. Click Start .
3. Select Programs .
4. Click Intervideo WinDVD .
5. Click the Properties icon to open the Properties window.
6. Click the General Properties tab.
7. Insert a single region DVD of the new region.
8. Select the correct region code for your country.
9. Click OK .
7-6 USB 2.0 CD-RW/DVD-ROM Combo II Drive: User ’s Guide