Crestron electronic DigitalMedia Room Controller DM-RMC-100 - Manual (Page 13)

Crestron DM-RMC-100 DigitalMedia™ Room Controller, CAT
DM-RMC-100 Specifications (Continued)
SPECIFICATION DETAILS
Available Accessories
CBL-HD Crestron Certified HDMI Interface
Cable
CBL-HD-DVI Crestron Certified HDMI to DVI
Interface Cable
CNSP-XX Custom Serial Interface Cable
CNXRMCS Current Sensor
DM-CBL DigitalMedia Cable
DM-CONN DigitalMedia Cable Connector
DM-DR DigitalMedia Repeater
IRP2 IR Emitter Probe
MP-WP140 Media Presentation Wall Plate –
DVI with Mini-TRS Stereo Audio
MP-WP152 Media Presentation Wall Plate –
HDMI
MP-WP185 Media Presentation Wall Plate -
Crestron DigitalMedia CAT with
DMNet
1. HDMI requires an appropriate adapter or interface cable to accommodate a DVI
signal. CBL-HD-DVI interface cable available separately.
2. The latest software versions can be obtained from the Crestron Web site. Refer to
the NOTE following these footnotes.
3. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest
Crestron Product Catalog for a complete list of 2-Series control systems.
NOTE: Crestron software and any files on the Web site are for
authorized Crestron dealers and Crestron Authorized Independent
Programmers (CAIP) only. New users may be required to register to
obtain access to certain areas of the site (including the FTP site).
Operations & Installation Guide – DOC. 6743-1F Room Controller, CAT: DM-RMC-100 • 9