Crestron electronic DigitalMedia Room Controller DM-RMC-100 - Manual (Page 32)

DigitalMedia™ Room Controller, CAT Crestron DM-RMC-100
3. Use the Address Book in Crestron Toolbox to create an entry for
the DM-RMC-100 using the TCP connection type and enter the IP
address of the DM-RMC-100.
4. Display the DM-RMC-100’s “System Info” window (click the
icon); communications are confirmed when the device information
is displayed.
USB Communication via DM Switcher
To establish USB communication between the PC and the
DM-RMC-100 via a DM switcher:
1. Use the Address Book in Crestron Toolbox to create an entry using
the expected communication protocol (USB). When multiple USB
devices are connected, identify the DM switcher by entering
“DM-MD8X8”, “DM-MD16X16” or “DM-MD32X32” in the
Model textbox, the unit’s serial number in the Serial textbox or the
unit’s hostname in the Hostname textbox. The hostname can be
sound in the “System Info” window in the Ethernet section of the
window, however, communication must be established in order to
see this information in the “System Info” window.
2. Display the DM-RMC-100’s “System Info” window (click the
icon); communications are confirmed when the device information
is displayed.
28 • Room Controller, CAT: DM-RMC-100 Operations & Installation Guide – DOC. 6743-1F