Crestron electronic DigitalMedia Room Controller DM-RMC-100 - Manual (Page 24)

DigitalMedia™ Room Controller, CAT Crestron DM-RMC-100
Use the following procedure to install the DM-RMC-100.
1. Attach supplied connector plugs to the appropriate cables. Refer to
“Hardware Hookup” which starts on page 21.
2. Attach the included metal mounting plate (2019091) to the
mounting surface using four screws (not supplied).
3. Attach the DM-RMC-100 to the mounting plate using the four
included #06-32 x 1/4" Phillips screws (2007215), as shown in the
illustration below.
Mounting DM-RMC-100 to Electrical Box
DM-RMC-100
Metal Mounting Plate
(2019091)
Drywall
Screws (4) #06-32 X 1/4"
(2007215)
20 • Room Controller, CAT: DM-RMC-100 Operations & Installation Guide – DOC. 6743-1F