Dell OptiPlex 3010 (Mid 2012) - Manual (Page 23)

5. Pry the thermal sensor away from the chassis front and remove.
Related Links
Installing the Front Thermal Sensor
Installing the Front Thermal Sensor
1. Secure the thermal sensor to the chassis front.
2. Thread the thermal sensor cable into the chassis clips.
3. Connect the thermal sensor cable to the system board.
4. Install the cover .
5. Follow the procedures in After Working Inside Your Computer .
Related Links
Removing the Front Thermal Sensor
Removing The System Fan
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the cover .
3. Disconnect the system fan cable from the system board.
23