Dell Serial Attached SCSI Host Bus Adapter 5i Integrated and 5E Adapter - Manual (Page 21)

Driver Installation
19
10 Click Finish to complete the installation.
11 Restart the system.
Updating an Existing Windows Driver
Perform the following steps to update the Windows driver for the SAS 5 HBA already installed on
your system
.
NOTE:
It is important that you close all applications on your system before you update the driver.
1 Click Start →
Settings
→
Control Panel
→
System.
The System Properties screen appears.
NOTE:
For systems running Windows Server 2003 operating system, click Start
→
Control Panel
→
System.
2 Click on the Hardware tab.
3 Click Device Manager.
The Device Manager screen appears.
4 Double-click on SCSI and RAID Controllers.
5 Double-click the SAS 5 HBA for which you want to update the driver.
6 Click the Driver tab and click on Update Driver.
The screen for the Upgrade Device Driver Wizard displays.
7 Provide the appropriate driver package (from your driver diskette) on the Locate Driver Files screen.
8 Select Install from a list or specific location.
9 Click Next.
10 Follow the steps in the wizard to search the diskette for the driver.
11 Select the .INF file from the diskette.
NOTE:
For systems running Windows Server 2003 operating system, select the name of the driver,
not the .INF file.
12 Click Next and continue the installation steps in the wizard.
13 Click Finish to exit the wizard and restart the system for the changes to take place.
Installing the Red Hat Enterprise Linux Driver
Use the procedures in this section to install the driver for Red Hat Enterprise Linux AS (versions 3, 4, and 5)
and ES (versions 3, 4, and 5).
NOTE:
The device driver for Red Hat Enterprise Linux AS Version 5 is native. To ensure you have the latest version
of this driver, check the Dell Support website at support.dell.com. If a newer version exists, you can download the
driver to your system.
KD534bk1.book Page 19 Monday, April 2, 2007 4:37 PM