Playback on a tv screen, Co py – Canon DC 310 User Manual

Page 62

Advertising
background image

62 •

External Connections

Playback on a TV Screen

This section explains how to play back
the disc or still images with this
camcorder by connecting it to a TV. To
play back the disc with another DVD
device refer to Disc Playback on an
External Device
(

47).

POINTS TO CHECK

Before connecting the camcorder, select
the [TV TYPE] setting according to the TV
set to which you will connect the
camcorder

(

68)

.

Connecting

Connect the camcorder to the TV
following the connection diagram shown
in the previous section Connection
Diagram
(

61).

Playback

1

Turn on the camcorder and the
connected TV or VCR.

On a TV: Select as the video input the
same terminal to which you
connected the camcorder.
On a VCR: Set the input selector to
the external video input (usually
labeled LINE IN).

2

Start the playback of the movies
(

34) or still images (

53).

NOTES

• Turn off all the devices before starting

the connections.

• Sound from the built-in speaker will be

muted while the STV-250N Stereo Video
Cable is connected to the camcorder.

• We recommend powering the camcorder

using the compact power adapter.

• Refer also to the instruction manual of

the connected TV.

Copying your Recordings to an External
Video Recorder

You can copy your recordings by
connecting the camcorder to a VCR or a
digital video device.

Connecting

Connect the camcorder to the device
following the connection diagram shown
in the previous section Connection
Diagram
(

61).

Recording

1

Connected device: Load a blank
cassette or disc and set the device
to record pause mode.

2

This camcorder: Locate the scene
you wish to copy and pause
playback shortly before the scene.

3

This camcorder: Resume the
movie playback.

4

Connected device: Begin recording
when the scene you wish to copy
appears. Stop recording when
copying is complete.

5

This camcorder: Stop playback.

NOTES

• We recommend powering the camcorder

using the compact power adapter.

• By default, the on-screen displays will be

embedded in the output video signal, but
you can change the displays by
repeatedly pressing

(

36).

(

21)

(

21)

DISP.

CO

PY

Advertising
This manual is related to the following products: