Dell Latitude C600 - Manual (Page 33)

5. If you encounter resistance when inserting it, do not force the card. Check the card's orientation and try
again.
NOTE: Use a ZV PC Card in the lower connector only.
PC Card Blanks
Save the blank to use whenever you do not have a PC Card installed. The blank protects the PC Card
connector from dust and other particles.
Removing PC Cards and Blanks
NOTICE: If you are using Windows 98 or Windows 2000, use the PC Card configuration
utility on the taskbar to select and stop a card before you remove it. If you do not stop
the card using the configuration utility, you could lose data from open application
programs.
1. Stop the PC Card by using the PC Card configuration utility on the taskbar.
2. Rotate the PC Card eject button outward (see step 1 in Figure 9) for the card or blank you want to
eject.
Figure 9. Removing a PC Card