Reinstalling software – Dell Latitude C600 User Manual
Page 92
Reinstalling Software: Dell™ Latitude™ C600/C500 User's
Guide
Installing Drivers and Utilities
Installing the Asset Tag Utility
Installing the Internal Modem and Network Adapter Drivers (Optional)
NOTES: Dell recommends that you print these procedures before you begin.
You may need administrator privileges to perform some of the procedures in this section. Dell
recommends that you check with your network administrator before performing the procedures.
Installing Drivers and Utilities
The Dell ResourceCD for your computer contains most of the drivers that you will need for your computer,
including drivers for operating systems that may not be on your computer. Verify that the driver you are
loading is for your operating system.
To reinstall drivers for optional devices such as wireless communications, DVD drives, and Zip drives, see
the software CD and documentation that came with those devices.
You can also access and download new drivers, system tools, and documentation from Dell's technical
support page at
support.dell.com. For more information on using the operating system installed on your
computer by Dell, see the operating system user's guide that came with your computer.
NOTICE: Before you reinstall drivers, make sure that your computer is undocked.
To install a driver or utility from your ResourceCD:
1. Save your work in all open programs.
2. Insert your ResourceCD into the CD or DVD drive.
In most cases, the CD should start running automatically. If it does not, start Microsoft® Windows®
Explorer, click your CD drive directory to display the CD contents, and then click the
autorcd
application file. If a welcome screen appears, click
Next. The first time that you run the CD, it might
prompt you to install some setup files. Click
OK and follow the instructions on the screen to continue.
3. From the
Language pull-down menu in the toolbar, select your preferred language for the driver or
utility (if available).
A welcome screen appears.
4. Click
Next.
5. Under
Search Criteria, select the appropriate categories from the System Model, Operating