Dell Inspiron 20 (3045, Early 2014) - Manual (Page 61)

Removing the System Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
NOTE: Your computer’s Service Tag is stored in the system board. You
must enter the Service Tag in the system setup after you replace the
system board.
NOTE: Before disconnecting the cables from the system board, note the
location of the connectors so that you can reconnect them correctly
after you replace the system board.
Prerequisites
1 Remove the stand assembly .
2 Remove the back cover .
3 Remove the VESA-mount bracket .
4 Remove the memory module(s) .
5 Remove the system-board shield .
6 Remove the wireless card .
7 Remove the heat sink .
61