Maintenance mode, Maintenance mode menu – Dell 966 All In One Photo Printer User Manual
Page 53
You can view or change the settings in the TCP/IP Menu by selecting TCP/IP from the Network Setup menu.
Maintenance Mode
To access Maintenance mode options:
1. From the main menu, press the up or down Arrow button to scroll to Maintenance.
2. Press the Select button .
Menu
item
Settings
* Factory default setting
Enable
DHCP
Yes*
No
NOTE:
You cannot change or set an IP Address, IP Netmask, and IP Gateway if DHCP is enabled.
Set IP
Address
Press the Select button to enter the Set IP Address menu.
From the Set IP Address menu, use the keypad to enter an IP address. Press the right Arrow button to
enter a set of numbers in the next field, or press the left Arrow button to erase an entry. Press the Back
button to save the settings.
NOTE:
The IP address cannot be changed if DHCP is enabled.
Set IP
Netmask
Press the Select button to enter the Set IP Netmask menu.
From the Set IP Netmask menu, use the keypad to enter an IP address. Press the right Arrow button to
enter a set of numbers in the next field, or press the left Arrow button to erase an entry. Press the Back
button to save the settings.
NOTE:
The IP address cannot be changed if DHCP is enabled.
Set IP
Gateway
Press the Select button to enter the Set IP Gateway menu.
From the Set IP Gateway menu, use the keypad to enter an IP address. Press the right Arrow button to
enter a set of numbers in the next field, or press the left Arrow button to erase an entry. Press the Back
button to save the settings.
NOTE:
The IP address cannot be changed if DHCP is enabled.
Maintenance Mode Menu
Menu item
Action
View Ink Levels
Press the Select button to display the current ink level for each cartridge on the screen.
Clean Cartridges
Press the Select button to clean the ink cartridges.
Align Cartridges
Press the Select button to align the ink cartridges.
Change Print Cartridges Press the Select button to view steps detailing how to change ink cartridges.
Print Test Page
Press the Select button to print a test page.
Call Diagnostics
Off*
Audio on
Print T30 Signals Report
Both Audio and Report