Scanning problems – Dell 966 All In One Photo Printer User Manual

Page 90

Advertising
background image

4. From the Image Patterns tab, select Remove image patterns from magazine/newspaper (descreen), and then

click OK.

5. Click Copy Now.

Make sure the document or photo is loaded correctly on the scanner glass or into the ADF.

For more information, see how to load originals:

On the Scanner Glass

.

Into the ADF

.

Check paper sizes.

Make sure the paper size being used matches the size you selected on the operator panel or the Dell All-In-One Center.

Scanning Problems

Check for blinking lights and error messages on the printer.

For more information, see

Error Messages

.

Check the USB cable.

Ensure the USB cable is firmly connected to your printer and your computer.

Shut down the computer, reconnect the USB cable as shown on the Setting Up Your Printer poster, and then restart

the computer.

Determine if the printer software is installed.

Click Start® Programs or All Programs® Dell Printers.

For Windows Vista:

1. Click ® Programs.

2. Click Dell Printers.

If the printer does not appear in the list of printers, the printer software is not installed. Install the printer software. For

more information, see

Removing and Reinstalling Software

.

Correct communication problems between the printer and the computer.

Remove the USB cable from your printer and your computer. Reconnect the USB cable to your printer and your

computer.

Turn off the printer. Unplug the printer power cable from the electrical outlet. Reconnect the printer power cable into

the electrical outlet, and turn on the printer.

Restart your computer.

Change the scan resolution to a lower value if scanning takes too long or freezes the computer.

1. Click Start® Programs or All Programs® Dell Printers® Dell Photo AIO Printer 966.

Advertising