Setting up 5.1 audio connections – Dell Studio XPS M1340 (Mid 2010) User Manual

Page 14

Advertising
background image

12

Setting Up Your Studio XPS™ Laptop

Select either

4.

Broadband (PPPoE) or Dial-up,

depending on how you want to connect:

Choose

a.

Broadband if you will use a DSL,

satellite modem, cable TV modem,

or wireless technology connection.
Choose

b.

Dial-up if you will use an optional

USB dial-up modem or ISDN.

NOTE: If you do not know which type of

connection to select, contact your ISP.

Follow the instructions on the screen and

5.

use the setup information provided by your

ISP to complete the setup.

Setting Up 5.1 Audio Connections

To set up 5.1 audio connections:
Click Start

Control PanelAdditional

Options. Run IDT Audio Control Panel. In the
Jacks tab, there are three connector icons.

Follow the instructions to finish the setup.

Click the microphone icon, select

1.

Device:

Rear Speakers, and plug your rear speaker

cable to the audio in/microphone connector.
Click the middle headphone icon, select

2.

Device: Center/LFE Speaker, and plug your

center/woofer speaker cable to the middle

audio out/headphone connector.
Click the right headphone icon, select

3.

Device: Front Speaker, and plug your

front speaker cable to the right audio

out/headphone connector.

Advertising