Dell Latitude E6420 (Early 2011) - Manual (Page 35)

Memory Card
12
Removing the Memory Card
1. Follow the procedures in Before Working On Your Computer
2. Remove the ATG Handle (only for E6420 ATG systems).
3. Remove the ATG Port Cover (only for E6420 ATG systems).
4. Remove the battery .
5. Remove the Secure Digital (SD) card .
6. Remove the base cover .
7. Use your fingertips to spread apart the securing clips on each end of the
memory module connector until the memory module pops up.
8. Remove the memory module from its connector on the system board by
drawing the module from the system board at a 45-degree angle.
35