Installing the palm rest assembly – Dell Latitude E6420 (Early 2011) User Manual
Page 68
Advertising
Installing the Palm Rest Assembly
1. Align the palm rest assembly with the computer and gently snap it into
place.
2. Replace and tighten the screws that secure the palm rest assembly to the
system board.
3. Connect the LED, smart card, touchpad, RFID, and ExpressCard cables to
the system board.
4. Replace and tighten the screws that secure the palm rest assembly to the
computer.
5. Install the
6. Install the
7. Install the
.
8. Install the
.
9. Install the
10. Install the
.
11. Install the
12. Install the
.
13. Install the
14. Install the
(only for E6420 ATG systems).
15. Install the
(only for E6420 ATG systems).
After Working Inside Your Computer
68
Advertising