Setting up the dell|equallogic ps series san, Creating the group – Dell PowerVault NX1950 User Manual
Page 21
Setting Up the Dell|EqualLogic PS Series SAN
21
Setting Up the Dell|EqualLogic PS
Series SAN
The following sections describe how to create a Dell|EqualLogic PS Series
group, create volumes, and restrict access to the volumes.
Creating the Group
Use the Group Manager GUI or CLI to manage a group. Access the GUI from
a web browser by connecting to the group IP address. Access the CLI from a
telnet or ssh connection to the group IP address or a serial connection to a
group member. After you have established a connection to the group, log in to
an administration account such as
grpadmin
. The following list of
documentation is available on the EqualLogic Customer Support web site.
•
For detailed information about setting up PS Series storage array hardware
and getting started with a group, see the PS Series QuickStart.
•
For detailed information about volume setup and advanced group
management using the graphical user interface (GUI), see the Group
Administration manual.
•
For more information about using the command line interface (CLI) to
manage a group and individual arrays, see the CLI Reference manual.
Book.book Page 21 Monday, February 4, 2008 1:26 PM