Dell PowerVault NX1950 - Manual (Page 30)

30
Configuring Shared Storage on Your Dell|EqualLogic PS Series Storage Array
4 Select the desired iSCSI target and click Log On. In the Log On to Target
window, check the box next to Automatically restore this connection
when the system reboots.
5 Perform step 4 on all the nodes in the cluster.
6 If you want to use multipath I/O, in the Log On to Target window, check
the box Enable multi-path and then click Advanced. This enables you to
specify multiple physical paths to the same target.
For more information about configuring multipath I/O, see the EqualLogic
technical report Deploying Microsoft Windows Server 2003 MPIO
®
in an
iSCSI SAN.
Figure 5-1. Single Interface Log On and Multipath I/O Log On
7 If the volume requires CHAP credentials, in the Log On to Target window,
click Advanced. The Advanced Settings window appears as shown in
Figure 5-2. Check the box next to CHAP logon information and specify
the required user name and secret (password). The information must
match an access control record for the volume and an entry in a CHAP
database set up in the group or on an external Remote Access Dial-In User
Server (RADIUS). After entering the information, click OK.
Book.book Page 30 Monday, February 4, 2008 1:26 PM