Dell OptiPlex 160 (Late 2008) User Manual
Page 36
Advertising
10.
Replace the NVRAM module if it was removed (see
Replacing the NVRAM Module
).
11.
Replace the processor heatsink assembly (see
Replacing the Processor Heatsink Assembly
).
12.
Replace the hard drive bracket assembly if it was removed (see
Replacing the Hard Drive Bracket Assembly
).
13.
Perform the procedure in
After Working on Your Computer
.
14.
Restart your computer and enter the BIOS setup to configure parameter settings as needed (see
Entering the BIOS Setup Utility
).
Back to Contents Page
Advertising