Intel security driver – Dell Dimension L___cx User Manual
Page 12
8. In the Description list, click Dimension L Series: Intel 800 Series Chip Set Driver.
9. In the All Files list, double-click setup.exe.
10. Click Next to start the driver installation or click Quit to exit the installation process.
11. When prompted to restart your computer to complete the installation, remove the Dell Dimension ResourceCD from the CD-ROM or DVD-
ROM drive and then click Finish.
Intel Security Driver
Dell installed the Intel Security driver on your hard-
disk drive. No further installation or configuration is needed. If you ever need to reinstall this
driver, see the appropriate procedure for the Microsoft
,
Intel Security Driver For Windows 98 and Windows NT
To reinstall the Intel Security driver on systems running Windows 98 and Windows NT, perform the following steps:
1. Start the Windows 98 or Windows NT operating system.
2. Insert the Dell Dimension ResourceCD into the CD-ROM or DVD-ROM drive.
The Dell Dimension ResourceCD screen appears.
3. Click the right-arrow button.
The first time that you use the Dell Dimension ResourceCD, you are prompted to select a language.
4. Select the language of your choice, and click OK.
5. In the All Folders list, click the drivers folder.
An alert message appears, informing you that only knowledgeable users should install drivers.
6. Click OK to continue.
7. In the All Folders list, click the win98 or winnt folder.
8. In the Description list, click Dimension L Series: Intel Security Driver.
9. Click the only file that appears in the All Files list.
The file is named nnnnnnnn.exe, where nnnnnnnn is an eight-digit part number.
10. Follow the instructions on the screen, and accept all defaults.
11. When you are prompted to restart your system to complete the installation, remove the Dell Dimension ResourceCD from the CD-ROM or
DVD-ROM drive, and then click Finish.
Intel Security Driver for Windows 2000
To reinstall the Intel Security driver on systems running Windows 2000, perform the following steps:
1. Start the Windows 2000 operating system.
2. Insert the Dell Dimension ResourceCD into the CD-ROM or DVD-ROM drive.
The Dell Dimension ResourceCD screen appears.
3. Click the right-arrow button.
The first time that you use the Dell Dimension ResourceCD, you are prompted to select a language.
4. Select the language of your choice, and click OK.
5. In the All Folders list, click the drivers folder.
An alert message appears, informing you that only knowledgeable users should install drivers.
6. Click OK to continue.
NOTE: If you reinstall Windows 98, you must reinstall the