Dell Dimension L___cx - Manual (Page 20)

To remove the bezel, perform the following steps:
1. Remove the computer cover .
2. While facing the front of the computer, press in the bezel release tab the top of the chassis.
3. Swing the bezel away from the chassis, disengage the two retaining hooks at the bottom of the bezel, and carefully pull it away from the
chassis.
4. To replace the bezel, fit the two bezel retaining hooks into their corresponding slots on the chassis. Rotate the bezel toward the chassis until
the bezel latches into position.
3.5-Inch Front Panel Insert
To remove a 3.5-inch insert, perform the following steps:
1. Remove the bezel .
2. From the back of the bezel, press the release tab to the side.
3. Rotate the insert toward you, and remove it from the bezel.
Upper 3.5-Inch Drive
1 Bezel release tab
2 Retaining hooks
1 Insert
2 Tabs (2)
3 Release tab