Dell Dimension L___cx - Manual (Page 19)

1. Remove the computer cover .
2. Lay the computer on its side.
3. Press the release latch while lifting the power supply. Rotate the power supply out of the chassis while keeping the power cables clear.
4. When you rotate the power supply back into the chassis, gently lift the cable retainer and hold the drive cables out of the way.
5. Rotate the power supply into position until its release latch clicks.
6. Wrap the drive cables along the top of the latch in the retainers, as shown in the following figure.
Bezel
1 Release latch
2 Power supply
3 Cable retainer
1 Cable retainer
2 Drive power cables
3 Power supply