Dell PowerVault MD3000 - Manual (Page 31)

Using iSCSI
31
Using iSCSI
This chapter provides information on using iSCSI in MD Storage Manager.
For iSCSI prerequisite requirements and detailed step-by-step instructions on
setting up and configuring iSCSI, see the
Installation Guide.
Using the iSCSI Tab
The iSCSI tab is shown in the MD Storage Manager only when the
controllers contain iSCSI host ports. You can define or change settings for the
iSCSI target or enter the CHAP permissions in the iSCSI tab. Here are some
of the iSCSI settings:
• Change Target Authentication — Select the authentication method to be
supported by the target.
• Enter Mutual Authentication Permissions — Define the permissions for
initiators that require mutual authentication.
• Change Target Identification — Associate an alias with the target for
simpler identification.
• Change Target Discovery — Modify the way to discover iSCSI targets
using the Internet Storage Name Service (iSNS) server settings.
• Configure iSCSI Host Ports — Set the parameters for iSCSI host ports.
• View/End iSCSI Sessions — View iSCSI session details and end iSCSI
sessions.
• View iSCSI Statistics — View and save iSCSI statistics.