Replacing the display panel – Dell Inspiron Mini 12 (1210, Late 2008) User Manual
Page 16
8.
Replace the two rubber bumpers at the bottom of the display bezel on either side.
9.
Replace the display assembly (see
Follow the instructions in "Before You Begin" on page 9.
).
Replacing the Display Panel
1.
Remove the display assembly (see
Follow the instructions in "Before You Begin" on page 9.
2.
3.
Remove the six M2.5 x 3-mm screws securing the display panel.
4.
Disconnect the cables from the connectors on either side of the inverter board and the 2-in-1 camera and LVDS cable from the connector on the camera
board.
5.
Remove the display panel.
1 M2.5 x 3-mm screws (6)
2 inverter board connectors (2)
3 connector on the camera board
NOTE:
Note how the cables have been routed to the display panel.
1
2-in-1 camera and LVDS cable