Traps settings – Dell PowerEdge C410x User Manual
Page 26
Advertising
Traps Settings | 26
Traps Settings
In the Trap Settings page, you can set the IPv4 and IPv6 Destination List.
IPv6 and IPv4 are two completely separate protocols. IPv6 is not backwards
compatible with IPv4, and IPv4 hosts and routers will not be able to deal
directly with IPv6 traffic.
IPv6 has a significantly larger address space than IPv4. This results from the use
of a 128-bit address, whereas IPv4 uses only 32 bits.
When you finish the configuration, click Apply Changes.
Advertising