Dell PowerEdge C410x - Manual (Page 45)

IPMI 1.5 / 2.0 Command Support List | 45
Bit2 : Disable/Enable Fail Over 2
0 : Enable(1 to 4)
1 : Disable(1 to 2)
Bit1 : Disable/Enable Fail Over 3
0 : Enable(1 to 4)
1 : Disable(1 to 2)
Bit0 : Disable/Enable Fail Over 4
0 : Enable(1 to 4)
1 : Disable(1 to 2)
2 Optional
Bit7 ~ bit4: slot 1,2,3,4,13,14,15,16
01 : 1:2 & 1:4 mode
02 : 1:8 mode
Bit3 ~ bit0: slot 5,6,7,8,9,10,11,12
01 : 1:2 & 1:4 mode
02 : 1:8 mode
1 Completion code Response Data
2 Bit7 ~ bit4: Control by
01 : Jumper
02 : BMC
Bit3 : Enable/Disable Fail Over 1
0 : Enable(1 to 4)
1 : Disable(1 to 2)
Bit2 : Disable/Enable Fail Over 2
0 : Enable(1 to 4)
1 : Disable(1 to 2)
Bit1 : Disable/Enable Fail Over 3
0 : Enable(1 to 4)
1 : Disable(1 to 2)
Bit0 : Disable/Enable Fail Over 4
0 : Enable(1 to 4)