Dell PowerEdge C410x - Manual (Page 43)

IPMI 1.5 / 2.0 Command Support List | 43
Get Sensor Type S/E 2Fh O
Yes No
LAN Commands
Table 7-11. LAN Commands
Command NetFn CMD O/M Supported
Set LAN Configuration
Parameters
(Note: Parameter 9 and 25
are not supported.)
Transport 01h M Yes No
Get LAN Configuration
Parameters
(Note: Parameter 9 and 25
are not supported.)
Transport 02h M Yes No
Suspend BMC ARP Transport 03h O
Yes No
Get IP/UDP/RMCP
Statistics Transport 04h O Yes No
PEF/PET Alerting Commands
Table 7-12. PEF/PET Alerting Commands
Command NetFn CMD O/M Supported
Get PEF Capabilities S/E 10h M
Yes No
Arm PEF Postpone Timer S/E 11h M
Yes No
Set PEF Configuration
Parameters
Does not support
parameter 14, 15.
S/E 12h M
Yes No
Get PEF Configuration
Parameters S/E 13h M
Yes No