Dell Latitude 110L - Manual (Page 15)

Display Bezel
1. Follow the instructions in " Before Working Inside Your Computer ."
2. Remove the display assembly .
3. Use a plastic scribe to pry the six screw covers/display bumpers out of the screw holes on the front of the bezel.
4. Remove the six M2.5 x 5-mm screws from the front of the bezel.
5. Starting at the bottom of the display panel, use your fingers to separate the bezel from the top cover and lift the inside edge of the bezel away from
the top cover.
Display Panel
Removing the Display Panel
1 screw covers/display
bumpers (6)
2 display bezel
3 M2.5 x 5-mm screws (6)
4 display panel
5 M2 x 3-mm screws (8)
6 top cover
7 display-feed flex cable
CAUTION: Before performing the following procedures, read the safety instructions in the Product Information Guide.
CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of
your computer's electronic components. You can do so by touching an unpainted metal surface.
NOTICE: Carefully separate the bezel from the top cover to avoid damage to the bezel.