Dell Dimension 2400 User Manual
Page 14
Advertising
10.
Connect the power and data cables to the back of the replacement drive.
11.
Replace the computer cover
.
12.
Connect your computer and devices to electrical outlets, and turn them on.
13.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
Back to Contents Page
CAUTION:
Match the colored strip on the cable with pin 1 on the drive (pin 1 is marked as "1").
NOTICE:
To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.
Advertising