Dell Dimension 2400 - Manual (Page 35)

The following table shows Memory Information option information.
The following table shows CPU Information option information.
The following table shows Integrated Devices (Legacy Select Options) option information.
The following table shows Power Management option information.
The following table shows System Security option information.
Diskette Drive A: Displays floppy drive details.
Primary Drive 0: Displays primary hard drive 0. The default is Auto.
Primary Drive 1: Displays primary hard drive 1 (if installed). The default is Off.
Secondary Drive 0: Displays secondary hard drive 0.The default is Auto.
Secondary Drive 1: Displays secondary hard drive device type. The default is Off.
IDE Drive UDMA: Turns IDE Drive UDMA on and off. The default is On.
Option Function
Installed System Memory Displays the amount of installed system memory.
System Memory Speed Displays the speed of your system memory.
System Memory Channel Mode Displays the mode of your system memory.
AGP Aperture Displays the amount of aperture memory. The default is 128 MB.
Option Function
Hyper-Threading Enables Hyper-Threading. The default is Disabled.
CPU Speed Sets the CPU speed. The default is Normal.
Bus Speed Displays the bus speed.
Processor 0 ID Displays processor ID.
Clock Speed Displays clock speed.
Cache Size Displays cache size.
Option Function
Sound Turns the integrated sound off and on. The default is On.
Network Interface Controller Turns the network interface controller off and on. The default is On.
Mouse Port Turns the mouse port off and on. The default is On.
USB Emulation Turns USB emulation off and on. The default is On.
USB Controller Turns the USB controller off and on. The default is On.
Serial Port 1 Sets serial port options and turns the port off and on. The default is Auto.
Parallel Port Displays parallel port settings when <Enter> is pressed. The default mode is PS/2 and the I/O address default is 378h.
Diskette Interface Sets the floppy drive interface options. The default is Auto.
Primary Video Controller Sets the primary video controller. The default is AGP.
Option Function
Suspend Mode Displays the suspend state used by the computer. The default is S3.
AC Power Recovery Enables AC power recovery to occur. The default is Off.
Low Power Mode Minimizes power use when the computer is off. The default is Disabled.
Option Function
Password
Status
Locks and unlocks the password option. The default is Unlocked.
System
Password
Enables and disables the system password. The default is Not enabled.
Setup Password Enables and disables the setup password. The default is Not enabled.