Dell Dimension 2400 - Manual (Page 9)

9. Secure the filler bracket onto the end of the card with the screw you removed in step 7 .
10. Connect any cables that should be attached to the card.
See the documentation for the card for information about the card's cable connections.
11. Replace the computer cover .
12. Connect your computer and devices to electrical outlets, and turn them on.
13. Install any drivers required for the card as described in the card documentation.
Back to Contents Page
NOTICE: Do not route card cables over or behind the cards. Cables routed over the cards can cause damage to the equipment.
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.