CFM Corporation 3405BG - Manual (Page 13)

13
Assembly Step 9
1. Slide the handle washer onto the end of the door
handle, followed by the handle spring.
2. Feed the door handle into the hole through the
front of the door panel.
3. From the back side of the door panel, insert the
mounting bracket over the end of the handle.
4. With lock washers placed on the bolts, insert the
bolts through the mounting plate, into the pre-
threaded mounts and firmly tighten the bolts.
Tools needed: Locate these parts:
Handle Spring
Handle Washer
Hardware Bag E
Mounting
Bracket
1/4-20 x 3/8” Bolts
1/4-20 Lock Washers
(2 ea)
Phillips head
screwdriver
1
2
3 4
����
��������������
����
Door Handle Kit