Dell Vostro 500 (Mid 2009) - Manual (Page 36)

Back to Contents Page
Processor Thermal-Cooling Assembly
Dell™ 500 Service Manual
Removing the Processor Thermal-Cooling Assembly
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product
Information Guide.
1. Follow the instructions in Before You Begin .
2. Turn the computer over.
3. Remove the eight captive screws securing the bottom cover and remove it.
1 module cover 2 captive screws (8)
4. In sequential order, loosen the five captive screws securing the processor thermal-cooling assembly to the system
board, then carefully lift the processor thermal-cooling assembly out of the computer.