Dell Vostro 500 (Mid 2009) - Manual (Page 42)

1 screws (2) 2 charger board connector
3 charger board 4 system board
Replacing the Charger Board
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product
Information Guide.
1. Align the charger board to the system board in the right direction and gently press to connect the charger board
connector to the system board.
2. Replace the two screws securing the charger board to the system board assembly.
3. Follow the steps in Removing the Charger Board in the reverse order.
Back to Contents Page